Ion Blaster Beam™


The Nex Flow™ Ion Blaster Beam™ neutralizes static electricity and can remove static free dust up to 15 feet (4.6 m) away with no moving parts. It's compact design allows it to be used in hard to reach areas or confined spaces. The air volume and velocity are infinitely adjustable over a wide range using a pressure regulator to address any application from light to heavy duty. The use of an "air amplifier" (Model AM40) maximizes ionized airflow with large volume entrained while minimizing the use of compressed air.

In most applications only 10 psig (0.7 bar) is required to operate effectively. The Ionizing Point is a powerful ionizer which remains effective because the air exit "plastic PET head" of the unit prevents weakening if ions which metal attachments may do. This can make the Ion Blaster Beam™ far more effective than systems using metal.


  • Effective Static Elimination
  • Can clean static free dust at a distance
  • Compact design to fit in small spaces
  • Stand is pre-drilled for easy mounting

  • Eliminate static charge and cleaning parts
  • neutralize shrink wrap
  • Form fill and seal applications for bag opening
  • Neutralizing and cleaning the inside of blow molded parts
  • Eliminate static and cleaning of plastic assemblies
  • Dust removal from parts prior to painting
  • Remove static charge in slitting applications
  • Cleaning of packaging
  • Neutralization of static charge inside containers.

  • Low compressed air use
  • Rapid static decay
  • Quiet Operation
  • Shockless and non-radioactive
  • Compact and rugged design
  • Intake may be ducted to bring in atmospheric air from another area
  • No moving parts and minimal maintenance
  • Variable flow and force

    How The Ion Blaster Beam™ Works :

    Compressed air is supplied at (A) where it enters the air amplifier section of the Ion Blaster Beam and follows the Coanda profile inside the amplifier. Ambient air is entrained at (B) into the amplifier. The Ionizing Point (C) ionizes the amplified airflow exiting as a powerful high flow of static removing, ionized air (D). The unit is mounted on a stand (E) for convenient installation.


    Certification:  North American Power Supplies certified to UL and CSA standards and Spot Ionizer used with the Ion Blaster beam is included with the certification.  European Power Supplies CE approved and Spot Ionizer used with the Ion Blaster Beam is included with the certification.  Stainless steel emitters on the ionizer.

    Electrical: For use with 7 kV rms, 5 milliamperes (max) power supply which will last much longer than 5 kv power supplies.

    Electrical Hazard: Shockless (less or eualt to 5mA)

    Maximum Ambient Temperature:  122 degrees F or 50 degrees C.

    Part # Description
    17040 Ion Blaster Beam™ includes Air Amplifier, Spot Ionizers, Stand and 2 meters shielded cable
    17140 Ion Blaster Beam™ and Power Supply
    17340 Ion Blaster Beam™ Kit (c/w Ion Blaster Beam™, Power supply, Model 90001 water removal filter and Model 90008 regulator wi. gauge
    80111 120 V Power Supply, 2 outlet
    80121 230 V Power Supply, 2 outlet
    80112 120 V Power Supply, 4 outlet
    80122 230 V Power Supply, 4 outlet
    90001 Water Removal Filter c/w auto Drain
    90008 Regulator with gauge


    Power Supplies

    Ion Blaster Beam™ power supplies are available in various models including a unit that will monitor the static bars for effectiveness.

    Voltage Model# Description
    110V ENC-110/2 Two outlet (Can connect two static bars)
    220V ENC-220/2 Two outlet (Can connect two static bars)
    110V ENC-110/4 Four outlet (Can connect four static bars)
    220V ENC-220/4 Four outlet (Can connect four static bars)
    110V Multistat 110 Four outlet (Can connect four static bars, plus monitors performance. Can be connected into a system alarm or indicating light.)
    220V Multistat 220 Four outlet (Can connect four)


    PART NO. DESCRIPTION Size Price US Dollars
    17040 ION BLASTER BEAM $685.00
    17340 ION BLASTER BEAM KIT (incl 17140 plus 90004 and 90008) $1,210.00
    AM 40 Amplifier Only $182.00
    17940 Ion Blaster beam adaptor only $46.00
    17941 Ion Blaster beam stand only $52.00
    17611 Ion Spot Ionizer Only with threaded connection $405.00

    Prices are in USA dollars ? ex works Cincinnati, OH, USA for orders in USA

    Richmond Hill, ON, Canada for International orders.

    website :

    email :