|
|
|
| |
 |
Pneumatic Turbine Vibrators Manufactured by KJN |
|
|
|
| |
 |
| |
| Turbine Vibrators |
|
 |
| Turbine Vibrators : |
These find application in places where flow of material has to be promoted, such as small hoppers, chutes, pipe bends, components feeders, etc. These are available in two sizes:
1) Standard Turbine Vibrators
2) Mini Turbine (Aluminum or SG) Vibrators
|
|
|
|
|
|
|
 |
| Application Of Turbine Vibrators: |
This Turbine Vibrators has been designed for application in industrial settings. It is ideal for dislodging material from hooper (up to 2500 Kg capacity) bins and chutes and hence finds application in cement, food, pharmaceutical and chemical industries. Since it requires no lubrication it is ideal for application in a dry area. |
| |
| Construction Of Turbine Vibrators: |
This Vibrators is simple in design and is inherently silent in operation. It operates in any orientation and has a sturdy construction which makes it maintenance free. It also requires no lubrication for its operation
The inlet port is of 1/4'' BSP(F) and exhaust is fitted with a silencer to reduce noise. |
| Fluid : Compressed Air |
| Fluid Pressure : 10 Kg/cm2 max. |
| |
| Technical Specification Of Turbine Vibrators: |
| Weight : Approximate 1.5 Kg |
Speed : 7200 RPM |
Force : 120 Kg/F (1200 Nm) |
| Air Consumption : 9 CFM (at 6 Kg/cm2) |
Bin : Suitable for max. 2500 Kg hopper capacity |
|
| |
| Dimensions : See drawing |
| |
| Note : |
| Frequency and force depend on rigidity of mounting. They decrease on less rigid mounting. |
| Heavy duty vibrator motor is also available. Please contact us for details |
|
| |
|
|
| |
 |
| Application Of Turbine Vibrators-Mini: |
This Turbine Vibrators has been designed for applications that require small to medium amount of vibration. Ideal applications are for small capacity hoppers (up to 250 Kg capacity*) in powder filling machines, component feeders, vibration tables and small selves. |
| |
| Construction Of Turbine Vibrators-Mini: |
This Turbine Vibrators is available in two types of construction: Aluminium body or Sponge Iron body. The Aluminium body is lighter with a little less vibration frequency than the Sponge Iron vibrator (see table below). The rotor is made of Aluminium for both vibrators.
The inlet port is of 1/4'' BSP(F) and exhaust is fitted with a silencer to reduce the noise. |
| Fluid : Compressed Air |
| Fluid Pressure : 4.5 Kg/cm2 max. |
| |
| Technical Specification Of Turbine Vibrators-Mini: |
| Model |
Vibration/ minute |
Weight Kg. |
Force |
| |
20PSI |
CFM |
40PSI |
CFM |
60PSI |
CFM |
|
|
| Mini Turbine-Al |
16000 |
2 |
19000 |
4 |
23000 |
6 |
0.390 |
25
KGF at 60 PSI |
| Mini Turbine-SG |
18000 |
2 |
19000 |
4 |
23000 |
6 |
0.50 |
|
| |
| Dimensions: See drawing |
| NOTE : Plastic exhaust silencer provided with vibrator. |
|
|
|
|
| |
|
|
|
