Ion Air Knives

PRODUCT OVERVIEW

The Standard Air-BladeIonizer combines the superior designed Standard Air-BladeAir Knife with a quality static bar made by Haug, a world leading static controlmanufacturer. Charges can be eliminated quickly, even over large distances and surface area.

The Standard Air-Bladeair knife is an efficient and sturdy unit for many blow-off applications. For even greater efficiency and reduced noise levels you can utilize the Silent X-streamAir Blade. Both units utilize the quality Haug static bars- the RN bar for most applications or the extra strong VS bars (Triple X versions) for very high static charges and extremely high speeds

The Standard Air-BladeIonizer uses a small amount of compressed air for a powerful, and adjustable force with "laminar" flow to eliminate charges in applications where static bars cannot reach or where high speeds are a factor.

Normally the Standard Model RN Haug brand static bar can address most applications. For extremely high speeds and high charges the extra powerful VS model is used. For washdown applications (such as pharmaceutical areas), even a washable model is available at extra cost.

All Haug static bars come with a patented safety connector and fully shielded cable. The power supplies are "repairable" and are so well made, that we offer a two year warranty on them (one year on the bars).

FEATURES

  • Connections on the back or ends
  • It flows from end to end (full flow).
  • Stainless steel models are available for high temperature and corrosive models.
  • Models are designed for easy cleaning and prevention of dirt entering the static bar, minimizing potential damage.
  • Patented connectors with the ground intrinsic to the cable design.
  • Instant ON/OFF with no moving parts.
  • Repairable Power Supply with a two year warranty.
  • BENEFITS

  • Flexible mounting options.
  • Units can be mounted end to end for longer lengths with no air gap.
  • High temperature, extra strength, and even a unique washable stainless steel model is available for special applications or as required.
  • Ease of cleaning and maintenance.
  • No separate ground connection that can be cut and cause sparks or accidentally shock personnel.
  • Conserves air use when not required.
  • Eliminates one costly area which is power supply replacement. 2 year warranty assure quality product.
  • VIDEOS

    Standard Air-BladeIonizer- Compressed air enters at the rear (or end) ports at (A) of the Standard Air Blade (B). (See Standard Air Blade for a description of its operation). Entrained air follows the coanda profile of the air knife and along the front face flowing over the ionizing (static) bar (C) creating a fine sheet of ionized air along the entire length of the Air Blade ionizer at it leaves the air knife at point (D). The amplified air stream maximizes velocity and force and provides a well-defined sheet of ionized laminar flow for reduced energy use in the blow off of statically charged surfaces and to remove static at long distances from the assembly. For highly charged surfaces a stronger static bar is available (Triple X Air Blade ionizers).

    Power Supplies

    Static Elimination Air-BladeIonizer power supplies are available in various models including a unit that will monitor the static bars for effectiveness.

    Voltage Model
    Number
    Description
    110V ENC-110/2 Two outlet (Can connect two static bars)
    220V ENC-220/2 Two outlet (Can connect two static bars)
    110V ENC-110/4 Four outlet (Can connect four static bars)
    220V ENC-220/4 Four outlet (Can connect four static bars)
    110V Multistat 110 Four outlet (Can connect four static bars, plus monitors performance. Can be connected into a system alarm or indicating light.)
    220V Multistat 220 Four outlet (Can connect four)

    SPECIFICATIONS

    Static Elimination Air-BladeIonizers are supplied in several versions.

    Standard Air-BladeIonizer with a standard Nex Flow Air BladeAir Knife and standard strength Model RN Haug static bar. These units are ideal for most static removal applications.
    X-Stream Air-BladeIonizer with the extra quiet Nex Flow X-Stream Air BladeAir Knife and standard Strength Model RN Haug static bar. These units apply to most static removal applications where noise levels must be extremely low.
    Super Triple Standard Air-BladeIonizer with a standard Nex Flow Air BladeAir Knife and a triple strength Model VS Haug static bar. These units are ideal for static removal applications where static charges are unusually high and extra ionization is required such as very high speed applications or materials that can produce very high charges such as Mylar or tissue.
    Super Triple X-Stream Air-BladeIonizer with extra quiet Nex Flow X-Stream Air BladeAir Knife and a triple strength Mode VS Haug static bar. These units are ideal for static removal applications where static charges are unusually high and extra ionization is required and where noise issues are important.
    Special materials and static bars can be utilized for unique applications. If greater blow-off force is required, shims may be added to the Air BladeIonizer for higher capacities.

    Length Model Numbers- (X means with X-Stream Air-Blade, 150XX with RN static bar, 160xx means with VS static Bar)
    3" 15003/15003X
    6" 15006/15006X/16006/16006X
    12" 1501215012X/16012/16012X
    18" 15018/15018X/16018/16018X
    24" 15024/15024X/16024/16024X
    30" 15030/15030X/15030/16030X
    36" 1503615036X/16036/16036X

    DIMENSIONS

    Model "A" "OA"
    3" (76mm) 44mm 125mm
    6" (150mm) 90mm 200mm
    8" (203mm) 143mm 254mm
    12" (305mm) 250mm 351mm
    18" (457mm) 390mm 508mm
    24" (610mm) 543mm 661mm
    36" (914mm) 844mm 965mm

    STANDARD AIR BLADEIONIZER

    PART NO. DESCRIPTION Size Price US Dollars
    15003 Aluminum Air Blade c/w Haug Model RN Bar- 3" air blade $309.86
    15006 Aluminum Air Blade c/w Haug Model RN Bar- 6" air blade $332.12
    15012 Aluminum Air Blade c/w Haug Model RN Bar- 12" air blade $378.74
    15018 Aluminum Air Blade c/w Haug Model RN Bar- 18" air blade $434.73
    15024 Aluminum Air Blade c/w Haug Model RN Bar- 24" air blade $507.22
    15030 Aluminum Air Blade c/w Haug Model RN Bar- 30" air blade $598.97
    15036 Aluminum Air Blade c/w Haug Model RN Bar- 36" air blade $679.58
    15042 Al. Air Blade c/w Haug Model RN Bar- 24" + 18" air blade $871.19
    15048 Al. Air Blade c/w Haug Model RN Bar- two 24" air blade $977.95
    15054 Al. Air Blade c/w Haug Model RN Bar- 24" + 30" air blade $1,059.55
    15060 Al. Air Blade c/w Haug Model RN Bar- two 30" air blade $1,132.15
    15066 Al. Air Blade c/w Haug Model RN Bar- 30" + 36" air blade $1,221.29
    15072 Al. Air Blade c/w Haug Model RN Bar- two 36" air blade $1,300.42

    SUPER TRIPLE STANDARD AIR BLADEIONIZERS

    PART NO. DESCRIPTION Size Price US Dollars
    16006 Aluminum Air Blade c/w Haug Model VS Static Bar- 6" $527.12
    16012 Aluminum Air Blade c/w Haug Model VS Static Bar- 12" $546.73
    16018 Aluminum Air Blade c/w Haug Model VS Static Bar- 18" $577.22
    16024 Aluminum Air Blade c/w Haug Model VS Static Bar- 24" $839.97
    16030 Aluminum Air Blade c/w Haug Model VS Static Bar- 30" $974.58
    16036 Aluminum Air Blade c/w Haug Model VS Static Bar- 36" $1,043.71
    16042 Al. Air Blade c/w Haug Model VS Bar- 18" + 24" air blade $1,327.19
    16048 Al. Air Blade c/w Haug Model VS Bar- two 24" air blade $1,479.95
    16054 Al. Air Blade c/w Haug Model VS Bar- 24" + 30" air blade $1,609.55
    16060 Al. Air Blade c/w Haug Model VS Bar- two 30" air blade $1,739.15
    16066 Al. Air Blade c/w Haug Model VS Bar- 30" + 36" air blade $1,870.29
    16072 Al. Air Blade c/w Haug Model VS Bar- two 36" air blade $1,981.42

    Prices are in USA dollars- ex works Cincinnati, OH, USA for orders in USA

    Richmond Hill, ON, Canada for International orders.

    website : www.nexflow.com

    email : sales@nexflow.com