Standard (Fixed) Air Amplifiers

PRODUCT OVERVIEW

The Fixed Standard Air Amplifier from Nex Flow is die cast for rugged use. The gap can be adjusted by adding shims, five sizes are available. It is easy to mount and maintain reducing both compressed air consumption and noise levels. It is quiet, and can amplify flows up to 16 times their input air consumption rate




APPLICATIONS

  • Vent welding smoke
  • Cool hot parts
  • Dry wet parts
  • Clean machined parts
  • Distribute heat in molds/ovens
  • Ventilate confined areas
  • Dust collection
  • Exhaust tank fumes
  • ADVANTAGES

  • Compact, lightweight, portable
  • No electricity
  • No moving parts - no maintenace
  • Ends are easily ducted
  • Instant on/off
  • VIDEOS

    PERFORMANCE

    Die Cast Standard Air Amplifiers come standard with a .002" (.05mm) shim to control the compressed air exit gap which will work for 90% of all applications encountered. If greater force is required, more .002" (.05mm) shims or a .003" (.07mm) shim may be installed to open the gap for greater flow.

    Standard Air Amplifier - Ratios (approx.):

    Model AM10:   6.5:1
    Model AM20:   14:1
    Model AM40:   15:1
    Model AM75:   15:1
    Model AM125: 16:1

     

    Compressed Air Consumption: (Based on gap of .002" (/05 mm) except AM125 whch is .004" (0.1 mm)

    VELOCITY OF AIR FLOW FROM STANDARD AIR AMPLFIERS. Based on Gap setting of .002" (.05 mm)

    except for AM125 which is at .004" (0.1 mm)

    AM20

    AM40

    AM75

    AM125

    Inlet Pressure AM10 AM20 AM40 AM75 AM125
    20 PSIG
    (1.4 BAR)
    2.2
    (62.3)
    4.3
    (121.8)
    8.0
    (226.5)
    16.5
    (467.2)
    65.0
    (1840.6)
    40 PSIG
    (2.8 BAR)
    3.4
    (96.3)
    6.1
    (172.7)
    11.3
    (320.0)
    23.2
    (657.0)
    90.0
    (2548.5)
    60 PSIG
    (4.1 BAR)
    4.3
    (121.8)
    7.5
    (212.4)
    15.0
    (424.8)
    29.7
    (841.0)
    119.5
    (3383.9)
    80 PSIG
    (5.5 BAR)
    4.9
    (138.8)
    9.3
    (263.3)
    19.3
    (546.5)
    37.0
    (1047.7)
    137.5
    (3893.6)
    100 PSIG
    (6.9 BAR)
    5.8
    (164.2)
    11.0
    (311.5)
    25.1
    (710.8)
    44.0
    (1245.9)
    150.0
    (4247.5)
    120 PSIG
    (8.4 BAR)
    6.1
    (172.7)
    11.8
    (334.1)
    26.0
    (736.2)
    47.0
    (1330.9)
    152.0
    (4304.2)

    PRESSURE vs. VELOCITY AT OUTLET  Ft/min (m/sec)

    INLET PRESSURE AM10 AM20 AM40 AM75 AM125
    20 PSIG 9000 9000 6000 2800 3900
    (1.4 BAR) (45.72) (45.72) (30.48) (14.224) (19.812)
    40 PSIG 14000 14500 10000 4600 6050
    (2.8 BAR) (71.12) (73.66) (50.8) (23.368) (30.734)
    60 PSIG 16500 18200 13500 5950 7700
    (4.1 BAR) (83.82) (92.456) (68.58) (30.226) (39.116)
    80 PSIG 18500 21000 16200 6850 9000
    (5.5 BAR) (93.98) (106.68) (82.296) (34.798) (45.72)
    100 PSIG 20300 23200 18400 7550 10000
    (6.9 BAR) (103.124) (117.856) (93.472) (38.354) (50.8)
    120 PSIG 22000 25000 20200 7900 10500
    (8.4 BAR) (111.76) (127) (102.616) (40.132) (53.34)

    PRESSURE vs. VELOCITY AT 12" FROM OUTLET for all sizes except AM10 which is 6" FROM OUTLET  Ft/min (m/sec)

    INLET PRESSURE AM10 AM20 AM40 AM75 AM125
    20 PSIG 1000 1400 1850 1550 2000
    (1.4 BAR) (5.08) (7.112) (9.398) (7.874) (10.16)
    40 PSIG 1430 2350 2850 2300 3400
    (2.8 BAR) (7.2644) (11.938) (14.478) (11.684) (17.272)
    60 PSIG 1650 2870 3500 2750 4300
    (4.1 BAR) (8.382) (14.5796) (17.78) (13.97) (21.844)
    80 PSIG 1800 3200 4000 3150 4900
    (5.5 BAR) (9.144) (16.256) (20.32) (16.002) (24.892)
    100 PSIG 1900 3400 4380 3300 5300
    (6.9 BAR) (9.652) (17.272) (22.2504) (16.764) (26.924)
    120 PSIG 1980 3600 4700 3450 5600
    (8.4 BAR) (10.0584) (18.288) (23.876) (17.526) (28.448)

    Standard Air Amplifier - Ducting:Both the inlet (vacuum intake) and discharge ends of the unit may be ducted for light material and fume conveying applications. Care must be taken to avoid unnecessary restrictions that will cause back pressure or suction resistance that will reduce performance levels. Keep back pressure and resistance to under 2" of water column.

    DIMENSIONS

    Standard Air Amplifiers come in five standard outlet (outside) diameters: 3/4" (19mm), 1-1/4" (31mm), 2" (51mm), 4" (101mm), 8" (200mm).
    * BSP Adaptors Supplied Upon Request Free Of Charge

    Model Number

    Outside Diameter Of Outlet

    A

    Inches (MM)

    B

    Inches (MM)

    C

    Inches (MM)

    D

    Inches (MM)

    E

    Inches (MM)

    F

    Inches (MM)

    G

    Inches (MM)

    H

    Inches (MM)

    I

    Inches (MM)

    J

    Inches (MM)

    K

    (NPT)

    AM10
    3/4" (19)
    0.40" (10.16)
    1.30" (33.1)
    0.99" (25.2)
    1.89" (48)
    2.24" (57)
    0.19" (4.8)
    0.16" (4)
    0.59" (15)
    0.75" (19)
    1.59" (40.4)
    1/8"
    AM20
    1-1/4" (31)
    0.81" (20.6)
    1.86" (47.2)
    1.50" (38)
    2.39" (60.8)
    3.03" (76.9)
    0.27" (6.8)
    0.20" (5)
    0.59" (15)
    1.27" (32.2)
    2.16" (54.8)
    1/4"
    AM40
    2" (51)
    1.59" (40.4)
    3.15" (80)
    2.93" (74.5)
    3.54" (90)
    4.18" (106.1)
    0.29" (7.4)
    0.24" (6.2)
    0.79" (20)
    2.03" (51.6)
    2.84" (72.2)
    3/8"
    AM75
    4" (101)
    2.98" (75.8)
    5.91" (150)
    4.96" (126)
    6.89" (175)
    8.46" (215)
    0.53" (13.5)
    0.51" (13)
    1.18" (30)
    3.98" (101)
    5.94" (151)
    1/2"
    AM125
    8" (200)
    4.92" (125)
    10.24" (260)
    7.09" (180)
    - -
    - -
    - -
    - -
    0.79" (20)
    7.80" (198)
    16.54" (420)
    3/4"

    OPTIONS

    MOUNTING SYSTEMS FOR AIR AMPLIFIERS

    Mounting and holding systems are available for the Air Amplifiers. Fully flexible positioning.

    CAST ZINC AIR AMPLIFIERS

    PART NO. DESCRIPTION Size Price US Dollars
    AM10 Zinc Alloy Amplifier 3/4" $80.00
    AM20 Zinc Alloy Amplifier 1-1/4" $145.00
    AM40 Zinc Alloy Amplifier 2" $182.00
    AM75 Zinc Alloy Amplifier 4" $455.00
    AM125 Zinc Alloy Amplifier 8" $770.00
    AM10-1 Amplifier plus filter with auto drain model 90004 3/4" $175.00
    AM20-1 Amplifier plus filter with auto drain model 90004 1-1/4" $240.00
    AM40-1 Amplifier plus filter with auto drain model 90004 2" $277.00
    AM75-1 Amplifier plus filter with auto drain model 90001 4" $550.00
    AM125-1 Amplifier plus filter with auto drain model 90002 8" $928.00
    AM10-2 Amplifier + filter 90004 + regulator with gage 90008 3/4" $225.00
    AM20-2 Amplifier + filter 90004 + regulator with gage 90008 1-1/4" $290.00
    AM40-2 Amplifier + filter 90004 + regulator with gage 90008 2" $327.00
    AM75-2 Amplifier + filter 90001 + regulator with gage 90008 4" $600.00
    AM125-2 Amplifier + filter 90002 + regulator with gage 90009 8" $1,018.00
    SH10-2 Stainless Steel Shim, .002" for AM10 $10.00
    SH10-3 Stainless Steel Shim, .003" for AM10 $10.00
    SH20-2 Stainless Steel Shim, .002" for AM20 $11.00
    SH20-3 Stainless Steel Shim, .003" for AM20 $11.00
    SH40-2 Stainless Steel Shim, .002" for AM40 $12.00
    SH40-3 Stainless Steel Shim, .003" for AM40 $12.00
    SH75-2 Stainless Steel Shim, .002" for AM75 $20.00
    SH75-3 Stainless Steel Shim, .003" for AM75 $20.00
    SH125-3 Stainless Steel Shim, .003" for AM125 $30.00

    MOUNTING SYSTEMS FOR AIR AMPLIFIERS

    PART NO. DESCRIPTION Size Price US Dollars
    AMMS System for AM10, AM20, AM40 - NF60003 + screw $161.00

    Prices are in USA dollars - ex works Cincinnati, OH, USA for orders in USA Richmond Hill, ON, Canada for International orders.website : www.nexflow.comemail : sales@nexflow.com