This video shows the suction of wet plastic strands that are sucked using a Nex FlowTM Ring Vac. The sucked strands can be collected in a drum, porous collection bag, etc. The Ring Vac can also be used for suction and conveying of metal chips, ball bearings, food particles, plastic pallets, etc.

A simple shearing machine converted to Pneumatic operation. This machine can used on any shop floor for shearing sheet metal, bars and rods of M.S., Aluminum, Brass, etc. In this video a bi-metal sheet of 5mm thickness and 100mm width is being cut by the machine. We have manufactured a version of this machine with minor modifications for cutting Gold, Silver and Platinum bars/biscuits also.

A special purpose ma chine used for crimping Aluminum/plastic spouts onto plastic bucket caps. This machine is completely electronically controlled.

A special purpose horizontal machine this is used for neck reduction of MS tubes. This machine was made horizontal so that a variety of pipe varying in length from 1 ft to 4 ft can be worked on

An Impact Cylinder is used in this press for making Aluminum coins. This press has a capacity to make coins of up to 25mm diameter from 3mm thick aluminium sheets.

We manufacture Toggle Presses of various capacities. This video shows a toggle press of 2 Ton pressing force capacity operated using a pneumatic push-pull valve.

A simple pneumatic two pillar press which is completely electrically controlled. The cylinder ram is operated using a electrical foot pedal. The ram is returned by a signal from a sensor which can be located anywhere along the stroke of the cylinder. Thus the stroke of the cylinder is electronically controlled.